Emergency Services

The Garda Siochan, Ambulance Services and Fire Brigade are all expected to provide a rapid response in the event of an emergency.  Information and communication is key to the speed and level of response provided.  The Emergency Services therefore rely heavily on IT and Communication systems to facilitate a quick and accurate response.  Any power outage, even for a few seconds, can seriously compromise response times.  Relevant products and resources for the Emergency Services can be found below.

Related Products

  • Conceptpower DPA

    ABB Conceptpower DPA
    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    30-250 kVA
    30-250 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Modular
    Modular
    UPS systems such as the ABB Conceptpower DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    A revolutionary rack-mounted uninterruptible power supply designed with ‘hot swap’ modules for futur
    Read MoreCompare
  • Conceptpower DPA 500

    ABB Conceptpower DPA500
    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    100-500 kVA
    100-500 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Modular
    Modular
    UPS systems such as the ABB Conceptpower DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    Innovative 5 x 100kW modular UPS system offering pay-as-you-grow scalability combined with 99.9999%
    Read MoreCompare
  • ABB Powerscale

    ABB Powerscale
    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    10-50 kVA
    10-50 kVA
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    Standalone three-phase UPS system available in seven power ratings from 10 to 50kVA and in different
    Read MoreCompare
  • ABB Powerwave 33 - 400-500kW

    ABB Powerwave 33
    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    60-500 kVA (500kW)
    60-500 kVA (500kW)
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Standalone
    Standalone
    Standalone UPS systems allow several units to be operated in tandem (known as horizontal scaling) to provide for a greater load.
    Transformerless 3 phase UPS from 60 kVA to 500 kVA, parallelable up to 5 mVA. Offers unrivalled prot
    Read MoreCompare
  • ABB UPScale

    ABB UPScale
    Three phase
    Three phase
    A three-phase installation uses the full three phases which are generated from the grid. A three phase electrical supply comprises of three individual sine waves, and can be installed as either a three wire or three wire & neutral configuration. A three-phase source would typically come from a local transformer, with the standard three phase voltage being 400/415 VAC.    10-200 kVA per frame
    10-200 kVA per frame
    Understanding the total kVA requirement of a critical load is a key part of establishing a UPS’ true sizing requirement. For more information see kVA calculator and guide to choosing a UPS.    Modular
    Modular
    UPS systems such as the ABB Conceptpower DPA Series are configured by plugging up to five modules into a 19” rack to meet the capacity and redundancy requirement of the application load. This provides more flexibility and scalability than a complete cabinet containing a single standalone system.
    Three-phase UPS built for low to medium, high density power protection applications. Leading-edge mo
    Read MoreCompare

Related Resources

Maximising UPS system availability

UPS systems exist to supply clean power with near-perfect availability. It follows therefore that the UPSs themselves also have these levels of availability. In this article Ian Jackson, General Manager...

Read more

Warning Signals

Some UPSs need just simple communications capability to warn their critical load of an impending failure. Larger, more complex or widely distributed systems benefit in many ways from more sophisticated,...

Read more

The importance of service agreements

In this article, Ian Jackson, General Manager at Kohler Uninterruptible Power, a Kohler company, explains why professionally designed and fulfilled service contracts are so vital to UPS reliability. Any organisation...

Read more

Assuring Uninterrupted Clean Power – a Practical Perspective

When choosing a UPS system, obvious features such as its capacity, battery autonomy, availability, economy and resilience to failure will be weighed up first. Maintenance contracts will most likely be...

Read more
Top

Pin It on Pinterest

Share This