ABB Conceptpower DPA
A revolutionary rack-mounted uninterruptible power supply designed with ‘hot swap’ modules for future scalability. A transformerless UPS system with class-leading ‘six nines’ (99.9999%) power availability for demanding IT environments and data centres.
A revolutionary backup power supply offering up to 250 kVA (200 kW N+1) in a single frame, and low running costs with scalability for the future.
Advanced Decentralised Parallel Architecture (DPA)
Built on a Decentralised Parallel Architecture (DPA), each module has the necessary hardware and software for full system operation to minimise downtime and failures.
Easy to replace ‘hot-swap’ modules
True ‘hot-swap’ modularity enables the safe removal and/or insertion of UPS modules into a Conceptpower DPA system without risk to the critical load and without the need to either transfer the critical load onto raw mains or remove power from the critical load. This directly addresses today’s requirement for continuous uptime, reducing mean time to repair (MTTR).
Future proof installation
Future proof installation is assured with the Conceptpower DPA’s scalability and ability to supply the most demanding of modern loads.
Smallest footprint saves space
Class leading power density of 342kW/m2 significantly minimises the floor space required to accommodate the Conceptpower DPA. This is particularly important in data centres where space must be maximised to accommodate revenue-earning equipment.
With its six nines availability (99.9999%), Conceptpower DPA maximises availability by combining the benefits of decentralised parallel architecture, parallel redundancy and ‘hot-swap’ modularity.
The Conceptpower DPA is designed to automatically operate as a parallel redundant system, ensuring that the critical load always receives the highest possible level of power protection.
Class-leading energy efficiency
This uninterrupted power supply lowers carbon footprint with 96% true online efficiency, and an input current total harmonic distortion (THDi) of <3%.
Low running costs
By delivering energy efficiency, scalable flexibility and ergonomic design, the Conceptpower DPA offers low running costs and easy serviceability.
Blade servers typically have a leading power factor, which can present problems to UPS systems, particularly if they are not designed to power such loads. The Conceptpower DPA is designed to power all types of electrical loads, including blade servers. It can provide fully rated output power to power factors in the range of 0.9 leading to 0.8 lagging.
|Standalone / Modular||
|Parallelable up to||
30 x modules (6 x UPS units)
|Rated output voltage range||
380/220; 400/230; 415/240V three phase
Online double conversion
Up to 95.5%
|Power density per m2||
Up to 342kW/m2 / 428kVA/m2
External battery cabinets or integrated in UPS cabinets
|Volt free contacts||
|Input current distortion THDi @100% load||
|SEAI ACA scheme approved||
Data Centres, Large Networks